Member Login
Please click here to sign in or register.
Your basket is empty
Zniper Zextant plunger button
High quality plunger button made in Germany

Size Martin




$158.00
Qty
Product Description

PRODUCT DESCRIPTION

The ZNIPER Zextant plunger comes in 4 sizes for a perfect fit on your bow with either stick-on or bolt-on rest.
The Zextant has 3 specifically desined performance springs with different tensions to
ensure optimal adjustment.
In addition to its exceptional quality, the ZNIPER Zextant plunger is the first plunger with adjustable screw-in depth and spring tension via rotating micro-clicks.  
Therefore, the ZNIPER Zextant only needs to be screwed into the bow once and then can be set up easily each time with the specific number of rotating micro-clicks.

Sizes

The ZNIPER Zextant is offered in four different sizes. The size of the Zextant is defined by the screw-in depth.


 
  • Small (S):    19-23mm
  • Medium (M):    22-26mm
  • Large (L):    25-29mm
  • XLarge (XL):    28-32mm

Content

  • - Zextant plunger (pre-assembled) 
  • 3 springs of different strength 
    (soft – pre-assembled, medium strength, hard) 
    • Soft spring => 1,2 -3,9 Nm 
    • Medium spring => 3,8 -7,8 Nm 
    • Hard spring => 7,5 -11,8 Nm 
  • 2 replacement pins fitting the plunger 
  • These operating instructions 
  • 2 spacers: 1x 1mm and 1x 2mm to reduce the screw in depth of the plunger when needed
  • The following tools: 
    • 1x Allen key 1,5mm 
    • 1x Allen key 2,0mm 
    • 1x Clamping Tool to tighten Zextant and grid system

Key features of the ZNIPER Zextant

  • Both plunger depth and plunger pressure can be set in a reproducible grid pattern without having to repeatedly loosen and tighten the plunger for the plunger depth.
  • Lowest tolerances and the best design for an incomparable shooting experience
  • The Zextant is delivered with three springs of different strength
    • Soft spring => 1.2 – 3.9 Nm
    • Medium spring => 3.8 -7.8 Nm
    • Hard spring => 7.5 -11.8 Nm
    • The mean pressure adjustment of the spring is 0.04Nm, 0.05Nm or 0.06Nm depending on the spring strength
    • The springs were specially developed and manufactured in Germany for the ZNIPER Zextant
  • The basic components of the Zextant are made of stainless steel or 6061 aluminum. All aluminum components are anodized in titanium color.
  • Every component of the Zextant is available as a spare part and therefore the Zextant is very sustainable and environmentally friendly.
Reviews (0)
Currently there are no reviews for this product.
Questions (1)
was looking at matching this up with a Zniper arrow rest and a Black Elk riser. Would the Small size Zniper Zextant be sufficient for my needs?

Ive just had a look and the small looks to be too short for the Black Elk Riser.